AH-1Z AH-64 C-17 CH-47 CH-53K E-2C F-15 F-16 F-22 KC-10 MISC UH-60 UH-72 V-22
F-15 ENGINE MANAGEMENT DISPLAYF-15 Engine Management Display

This unit is a simulated version of the 4 X 4 inch Engine Management Display as used in the F-15 aircraft. It is intended for training and simulation purposes only.

The front appearance is a high fidelity duplicate of the original flight instrument, including the mounting bezel and the AMLCD display. The AMLCD back-light meets NVIS requirements as specified in MIL-STD-3009.

The unit is ruggedly built to take the most demanding simulation environments. It is one of a wide family of cockpit simulation products designed and manufactured by Panel Products

Video rate: ¼ VGA 320 by 240 pixels (Windowed or reformatted 640 by 480 pixels, VGA) 31.5 KHz horizontal by 60 Hz vertical.

Video input connector: Standard 15 pin high density D type with separate R, G, B, H, and V inputs. The unit can accept all sync formats, separate H and V, Composite H and V, and Sync on Green.

Display technology: Commercial AMLCD with NVIS filtered white LED backlight. Viewing angle is +- 80 degrees in both horizontal and vertical directions.

Environmental:OperatingStorage
1. Temperature10 to 35C-20 to 65C
2. Humidity20 to 90%0 to 95%
3. Shock/vibrationSuitable for ground benign and motion based trainers.

Power requirements: AC - 85-240 VAC, 47-63 Hz, power consumption 30 watts. Standard IEC 320 type receptacle. DC Voltage operation is available as an option, 20-32 VDC, (Unit is protected internally from accidental voltage reversal).

I/O connections, at rear panel of display:
1. J1 - Display input control, 9 pin "D", male pins.
2. J2 - Video maintenance port, 9 pin "D", female sockets.
3. J3 - Video input connector, 15 pin high density "D", female sockets, standard VGA type connections.
4. J4 - AC power connection, standard IEC 320 input module with integral fuse and ON/OFF switch.

Other rear panel:
1. Power on LED, green.
2. Video presence and status LED, bi-color.
3. Cooling fan, draws air into unit from back, exits out both sides.

Physical:
1. Image area: 3.45 inch wide by 3.00 inch high.
2. Front bezel: 4.50 wide by 4.15 high by 0.40 thick.
3. Size behind bezel: 4.24 wide by 3.92 high by 8.00 deep.
4. Weight: 2.8 lbs.

Manufacturer of Simulation Displays &
Lighted Panels (310)830-3331 Contact
Contact
 About
About
 Home
Home
 Products
Products
 Services
Services